Stainless Steel 8k Mirror & Etching Sheet
With high corrosion resistance and against high temperature as the best material for building decoration to be used on the elevator, conference room, escalator, building entrance.
Gold and Silver are the basic colors for production based on demand.
Current over 100 patterns are available for your best choice.
Standard Thickness: 0.8, 1.0, 1.5mm Standard Size: 1219mm X2438mm (4′ >x 8′)
Special pattern, different sizes and colors can be acceptable with negotiation
| SPECIFICATION |
THICKNESS : 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0MM
SIZE: 1000X2000MM; 1220X2440MM; 1250X2500MM, 1500X3000MM
| COLOR AVAILABLE |
Stainless Steel 8k Mirror & Etching Sheet can be supplied with different colors as Golden, Rose gold, Black, Brown, Bronze, Champagne or as customer requirement.
| SELECTING THE GRADE |
Hairline/No.4 Brushed finish is widely obtainable in Type 201, 304, 316L, 430;
For the best results over time, selection of the proper grade of Hairline/No.4 Brushed is important.
Type 304, for most environments, is sufficient to prevent corrosion.
| FABRICATION |
Hairline/No.4 Brushed finish can be welded or soldered. Preferably, use a grade of welding wire more noble than the work piece. Through use of shield gasses, formation of a heat tint scale may be avoided in lighter gauges. When scale does form, care must be taken to remove this scale through mechanical or chemical means. Hairline/No.4 Brushed finish is directional, so it is essential to orient panels in relation to the rolling direction. After soldering, flux residue must be thoroughly removed.
| INSTALLATION |
Hairline/No.4 Brushed finish comes with a protective PVC covering that is high grade UV resistant and is designed to withstand the elements for several weeks. Yet it is recommended that this PVC covering be removed immediately after installation to prevent adhesive residue from adhering to the finish. Hairline/No.4 Brushed finish’s appearance is very uniform, but any metal surface, including a painted one, is sensitive to misalignment of panels on differing planes. Please take extra care to install within reasonable tolerances to ensure full benefit of Hairline/No.4 Brushed finish’s unvarying appearance. After installation, any rust stains from tools or construction debris must be removed.
