Stainless Steel Checkered Plate
Stainless steel checkered plate due to the excellent corrosion resistance and slip resistance has been used in many industries.
In recent years the use of stainless steel checkered plate are continuous innovation, breakthrough, change, application of industry and product models are continuously increasing, the rate of replacement product updates and more frequent.
Stainless steel checkered plate due to the excellent corrosion resistance and slip resistance has been used in many industries.
| SPECIFICATION |
Thickness : 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm for cold pattern; 3.0-14mm for hot pattern;
Saiz: 1000X2000MM; 1220X2440MM; 1250X2500MM, 1500X3000MM or as required;
Pattern: Many types can supplied as Diamond type, Bean type, “T” type etc.
Package: Standard export package with metal pallet or as requirement;
| COMMON GRADE |
SS201, 202, 304/304L, 309S, 310S, 316/316L, 316Ti, 409L, 410S, 430, 446 etc.
Type 304, for most environments, is sufficient to prevent corrosion.
Type 316 should be used near the seacoast.
Low carbon grades (304L / 316L) should be used when parts are to be welded.
For extreme locations, e.g. near chemical plants or where steel may come into contact with salt water spray, different alloys will be required, subject to application review.
| APPLICATION |
Floor Covering and slip resistance; Commercial vehicle and vans; Access ramp covering for wheelchairs.
Wall and column protection to prevent impact damage where hand trucks, trolleys, sack carts are operated.
Door protection as kick plates or as a full door cladding etc.
